Some of my readers have heard me say that I don’t have a “favorite” classic wet pattern, which is true; it’s so hard to pick only one from the hundreds of possibilities. But considering I first tied the Parmacheene Belle forty years ago in 1974, and the fact that it was also my first-ever married wing wet fly, it has remained at the top of a list of my favorite wet flies. I enjoy tying them; I’ve probably tied more than five hundred of them over the years, and I also love looking at any well-tied Parmacheene Belle. The fly has a great combination of color – selection, arrangement, and balance, as well as material choice, and the best part: It catches fish! It was a successful fly back in 1876 when Henry P. Wells first created the pattern and named it for Lake Parmacheene in Maine’s Rangeley Lakes Region. Back then it was still possible to catch brook trout in the Rangeley Lakes that exceeded eight pounds in weight. The “Belle” also proved an effective fly for landlocked salmon as well. Well over one-hundred thirty years later, my fly fishing relatives, my friends, a number of my customers, and me, have all caught trout on this fly in waters scattered across the country. I have customers every year who order some to fish with. Successful catches of fish on the Parmacheene Belle also includes the unexpected bonus of brown and rainbow trout. I’ve even heard tell of anglers out west catching cutthroat trout on them as well. Hairwing versions of this fly were among some early 20th century steelhead patterns; in fact Plate No. 11 in Bergman’s Trout presents a hairwing version of the Parmacheene Belle.
I have written a number of posts on this fly during the last four years since I started my blog, and if you care to research them, simply use the search tab, type in “Parmacheene Belle,” hit the enter key and off you go! It will bring up every article that is titled or even mentions this fly. I did a married-wing streamer version of this about three years ago.
My introduction to this pattern came through Trout, 1938, by Ray Bergman. It was a favorite pattern of his for catching large brook trout. In fact, in With Fly, Plug and Bait, 1947, Ray describes an occasion when he caught a large brook trout in Canada using a tandem wet fly rig consisting of two Parmacheene Belle wet flies, I believe they were both size #4. These flies were close together, much like a miniature tandem streamer.
The research for my ongoing book project, Favorite Fishing Flies – 1892, led me to the American Fly Fishing Museum in Manchester, Vermont, where the actual fly plates used in Mary Orvis Marbury’s 1892 book, Favorite Flies and Their Histories, are stored and occasionally placed on display. I had the privilege of gaining access to and viewing, studying, and photographing these historic fly plates. My work with them allowed me to ascertain many previously misidentified components of these patterns. This includes the tying recipes listed in every known publication that has claimed to represent these old wet fly patterns that were at one time cataloged by the Orvis Company. The problem was that Mary did not include the fly dressings for the patterns in her book. My research also led to to the 1883 book written by Charles F. Orvis and Albert Nelson Cheney, called Fishing With the Fly. In that book, there is a chapter called Fly Fishing in the Rangeley Region by Henry P. Wells, the originator of the Parmacheene Belle. In his chapter he presents the complete (almost- see below) original dressing for his pattern. I found it odd that the Orvis version did not feature the original white-with-red-stripe married wing that he specified, but rather, a simpler wing of married red and white in equal parts. Subsequent variations of this pattern developed over time, some no doubt modified to make them easier to tie commercially, and others as a result of unknown reasons.
A friend provided actual, custom-dyed mohair dubbing that I could use for the body, as specified by the originator. This mohair dubbing is available on John McClain’s website: www.feathersmc.com
I also started tying and teaching the reverse-wing method that was widely used in the 19th century for mounting wings on practically all fishing flies. My reasoning for this is that the threads in use for fly tying at the time were made of either cotton or silk and lacked the tensile strength of modern threads. Therefore, to prevent wings pulling out of the flies, someone developed the method of mounting the wings to be tied in, backwards, with the butt ends facing to the rear, wrapped in place, then the forward portion of the feathers were folded over to make the wing of the fly, and a band of thread, resembling a collar, was wound in place over the folded butt end of the wings to provide the final stage of secure the feathers to the hook. This caused the heads of the fly to be large, bulky, and rather unattractive, but nonetheless, completely functional. This method also calls for longer sections of wing quills to complete the process; goose wings quills are my preference, and one must be careful regarding the proportions so that the finished, folded-back wing is properly sized to the hook.
This method also gave the flies of the day their characteristic high wing angle. My personal feeling is that too many tiers today attempt to replicate these historic flies, and they too often use the widely available goose shoulders for the wings. This material looks fine, depending on your point of view, but goose shoulder was used mostly to make “splits” or side-sections on wings to add extra colors to a pattern, and was not used on wings, according to the hundreds of antique flies that I have seen and studied. Goose shoulder was used to make wings and sometimes tails on the old lake, bass, and trout flies. Flies made like this today are perfectly acceptable in that they look fine, they display well, especially to an untrained eye, and they will catch fish, but with the inherent low, sleek-looking wing that goose shoulder renders, they are not historically accurate. I’m talking about the original patterns, not just following or substituting ingredients and then lashing them willy-nilly to the hook. I believe the accurate reproduction of these historic flies is important, and is something that should not be forgotten. Like our society and culture in general, even in fly tying, at times it seems like there is too much of an “anything goes” attitude.
Following that slight but pertinent digression, I present a historically accurate reproduction of the famous the Parmacheene Belle:
Parmacheene Belle, 2/0. The authentic silk gut leader is doubled at the head of the fly, creating what was known as a “helper” or bite guard. This was either whipped with thread and varnished, or knotted an inch or so ahead of the head of the fly, and then another loop was made on the leader to provide a snelled loop-to-loop connection. The bite guard was thought to strengthen the leader and prevent the fish from breaking off the fly at this critical joint in the connection. This specimen also features the traditional closed-wing, tip-down mounting of the quills that was most popular at the time. Red was often used as a finishing thread on old flies.
Here is Henry Wells’ written narration of his recipe description for the Parmacheene Belle, taken from the text of his chapter in Fishing With the Fly:
“This fly somewhat resembles the No Name figured as No. 15 of Lake Flies in this book. As I tie it, the tail is two strands of white and two of scarlet; the body of yellow mohair, with silver tinsel; the hackle double; first white, with scarlet hackle wound over this – capping the former, so to speak; the wing white, striped with scarlet. By scarlet, the color of the scarlet ibis is to be understood.”
Wells does not mention the tag or butt components, but these ingredients, determined by my visible inspection of the 1893 Orvis Fly Display in the American Museum of Fly Fishing, are silver tinsel and peacock herl. Cosmetically speaking, especially considering the head, this is not representative of my “cleanest, most tidy” work. But that is not the intent with this article. My desire was to accurately replicate an actual 19th century Parmacheene Belle Lake Fly, as if you went back in time. I believe this is right on to what you would find in 19th century fishing fly store bins. The 2/0 hook was not outlandishly large for a brook trout upwards of five pounds.
My friend, Roger Plourde, has vintage silk gut for sale in various sizes, the price is $15.00. His e-mail is: rplourde01@comcast.net
I decided to include and re-post the photo of my Parmacheene Belle Streamer as well:
Parmacheene Belle Streamer, dressed on a 4x long hook. This older version features a yellow-dubbed body, rabbit fur. This fly illustrates is a little more “polished” representation of my fly tying.
Some of you might have noted a recent reduction in my posts here over the last few months. The reason for that is that I have been extremely busy since mid-November. I’ve added a couple new and significant and fun things to my life, one of which is drumming. I resurrected my musical ability and involvement after years of inactivity. My rock band disbanded in 1979, and other than an occasional performance in church or at a theater musical, I haven’t played in years. My late wife, Lou Anne, and I sang in a gospel quartet for twenty-seven years, and I have not sung anywhere since our last performance in August of 2006. She passed seven years ago this month.
I started off as a substitute drummer in a local classic rock band for a New Year’s Eve gig. Considering my schedule of two November fly tying shows, Thanksgiving, deer season, and Christmas, I ended up having to learn over sixty songs in two weeks. In early February, my drumming with the Pepper Street Band suddenly became a full-time position due to the fact their regular drummer has developed a serious health issue that has side-lined him for a while.
Right after New Year’s Day I also committed to joining the contemporary praise and worship band, Firstborn, at Pine Street United Methodist Church in Williamsport, Pennsylvania, where I have the added musical experience and fun of playing an electronic drum set. I also started singing again, mostly regular visits with friends to karaoke bars where I sing anything from George Thorogood to Toby Keith to Trace Adkins, ZZ Top, Billy Joel, Georgia Satellites, Fabulous Thunderbirds, Van Morrison, Lynyrd Skynyrd, even Frank Sinatra. I’m also the newest member of Cornerstone, the contemporary choir at Pine Street church as well. Firstborn performs every Sunday at the 8:30 service, and Cornerstone sings at the same service twice a month. Plus, I sing the lead vocals on a half-dozen of the songs on the Pepper Street playlist. Here’s a link to their song list: http://www.pepperstreetband.com/song_list%20II.html
Don’t worry folks, I’m not giving up my fly tying career! Just suddenly having a lot more fun! I thank God for my renewed good health! I also found out the best thing to do with negative, toxic, trash-talking people who try to mess with or mess up your life is to forget them and not address them in any way. That’s healthy too! Besides, it is impossible to reason with people who habitually spread rumors and prevaricate the truth about someone else for their own, selfish interests and perceived personal gain. You know what they say:”What goes around comes around.”
I’ve gotten more active on facebook; my band gigs and schedule is generally posted there, along with a link from my blog as well. Anyone interested in following my more personal and / or musical activity, just let me know, besides a friend request, please include a PM.
Thank you all for your many years of support! I am personally grateful to each of you for your belief in me and what I do. Me? I’m having too much fun, doing what I’ve always done, and going back to my musical roots. I was singing and playing drums before I ever started tying flies. Adding the music and meeting so many new people who are nice, decent folk, has already brought new friends into my life. I have a feeling this is only going to get better!
